[keep_it_warm]

1981 Kuwahara KZ-1

• Kuwahara KZ-1 frameset (original finish/decals)
  
• Suntour Power Stem
  
• Redline V-bars
  
• OGK grips
  
• Dia-Compe MX1000 rear caliper
  
• Dia-Compe Prebent lever
  
• Fluted Seatpost
  
• Suntour Seat clamp
  
• Elina Seat
  
• Suntour VX 170mm crankset (crank arms rattlecanned black)
  
• Izumi chain
  
• KKT Lightning pedals
  
• Ukai Speedline rims
  
• Suntour High Flange hubs
  
• Comp 2 tires

Everything on the bike is original finish except the crank arms as noted above

 kuwasmall6.JPG (256.34K)
Number of downloads: 13  kuwasmall1.JPG (261.96K)
Number of downloads: 17  kuwasmall3.JPG (248.68K)
Number of downloads: 7  kuwasmall4.JPG (288.09K)
Number of downloads: 11

[bmx4evr]

Hutch Pro Racer 1984

Hutch Pro Racer frame this is the frame that I received for Christmas 1984 original chrome
Hutch undrilled fork repowder
Hutch Aerospeeds original chrome
Hutch Pro Bars original chrome
Hutch Pedals original chrome original cages
Hutch pad set repro
Hutch Rad Kaps repro
Sugino disk repowder
Pro Neck chainring repowder
DK stem repowder
Dk seatpost clamp repowder
Dia Comp MX 1000 used
Terry Cable NOS
Shot Gun II seat used
Odessy seat post
Graphite Tuff II's with Ted Carl Kit
Tioga Comp III's Rainbow lable NOS
Grab On grips NOS
Tioga Bear Trap headset NOS
Zeronine Moto Control # Plate NOS
Zeronine # 17 NOS

I am the original owner of this frameset, it has gone under many transformations to this point and I don't think it will ever be complete.

Heres the pics

 group_hutch.jpg (293.2K)
Number of downloads: 27  raceboty1.jpg (245.2K)
Number of downloads: 29
 raceboty2.jpg (230.54K)
Number of downloads: 24  raceboty3.jpg (281.26K)
Number of downloads: 15  raceboty4.jpg (242.69K)
Number of downloads: 16

This post has been edited by keep_it_warm: 15 December 2007 - 01:25 PM

[broke L345]

############## 1980 TORKER MX ##################

This is a completely faithful recreation of my bike I had in 1980. So this was a rebuild that was an emotional one for me. not to mention having to find the ABSOLUTE correct parts such as the blue and yellow haro plate and the elina lighteningbolt seat in blue as well.

PARTS LIST

TORKER FRAME (original chrome)
TORKER PREDRILLED FORKS (original chrome)
TORKER 6 BOLT STEM original blue finnish with nos decal
TORKER VINAL PADS W PRO NECK STEM PAD (AS I HAD BITD) NOS
TORKER DECALS repro
OAKLEY GRIPS NOS
WIN BARS NOS
HARO LEVER NOS
HARO LIGHTENINGBOLT PLATE NOS
SHIMANO BRAKE CALIPER NOS
ELINA LIGHTENINGBOLT SEAT NOS
COOK BROTHERS LAY BACK SEATPOST USED ORIGINAL FINNISH
TAKAGI CRANKS USED ORIGINAL FINNISH
TUFF II'S RECONDITIONED
IZUMI CHAIN NOS


THIS IS ABSOLUTE 1980'S RACING MACHINERY
 BrokeChromeTorker2.jpg (105.91K)
Number of downloads: 12  BrokeChromeTorker1.jpg (130.71K)
Number of downloads: 13]




HERE IT IS FROM THE BUISINESS END.
 BrokeChromeTorker3.jpg (88.99K)
Number of downloads: 11



HEY WHAT ARE YOU LOOKING AT?
 BrokeChromeTorker4.jpg (45.19K)
Number of downloads: 11

This post has been edited by broke L345: 17 December 2007 - 09:59 AM

[broke L345]

I981 TORKER MX


TORKER FRAME repowdered
TORKER PREDRILLED FORKS repowdered
TORKER 6 BOLT STEM original condition
TORKER NYLON PADS nos
AME AMERICA GRIPS nos
SHIMANO BRAKES nos
HARO LIGHTENINGBOLT PLATE used original condition
KASHIMAX AERO SEAT nos
MKS FOOTJAW PEDDALS nos
SHIMANO DX CRANKS used original finnish
ARAYA 7X RIMS nos
SUZIE HIGH FLANGE HUBS used reconditioned original finnish
IZUMI BRASS COLORED CHAIN nos
FLUTED SEAT POST nos
MITSUBOSHI GREY LABEL COMP III "INDOOR" TIRES nos

THANK YOU.

I also just realized the plate isn't zip tied on in the pics but it is now (sorry)

Attached File(s)

•  BrokeRedTorker1.jpg (82.62K)
  Number of downloads: 11
•  BrokeRedTorker2.jpg (133.33K)
  Number of downloads: 11
•  BrokeRedTorker3.jpg (63.89K)
  Number of downloads: 7
•  BrokeRedTorker4.jpg (71.5K)
  Number of downloads: 10

This post has been edited by broke L345: 17 December 2007 - 09:54 AM

[J.T.]

Jason Jensen Torker

One of a kind bike featured on the April 1981 Bicycle Moto-cross Action cover and described in more detail within the magazine in which I had an article too! This bike was so aesthetically correct and blew me away!

Years later I had parts from all my years of biking including a Torker mini frame and fork. What a great anniversary present to see if I can build this guy exactly as the bike appeared, down to the zip ties! After two years of finally finding the Shimano hubs and Laguna bars it was time to build.

Everybody has really enjoyed the bike and to my surprise Jason Jensen heard about it and contacted me. He was really stoked to see it alive again since he had most of his BMX items stolen out of a storage area.

Well here's the bike that Juicy Jaws and Bob Osborn made famous!!! Enjoy!!!

VEHICLE

Frame - Torker Mini
Fork- Torker Mini
Stem - Torker (modified like Jason's)
Headset - Tange MX-5
Bars - Laguna alloy V-bars
Grips - Oakley .5
Number Plate - Haro
Caliper - Shimano sidepull
Brake Pads - Mathauser brake pads (finless)
Brake lever - Team Products two-finger
Seat - Uni with integral fiberglass post
Seatpost clamp -Tange
Padset - Torker vinyl
Rims - Araya 7X
Hubs - Shimano road with track axles
Spokes - D.T. 80-60 stainless spokes with D.T. alloy nipples
Front tire - Mitsuboshi Competition II 1.75
Rear tire - Raleigh Red Dot 1.75 rear tire 16 x 1.75 tubes
Freewheel - Sun Tour 16T
Chain - Sedisport
Pedals - Sun Tour MP100
Cranks - Shimano 600 EX 170mm cranks
Bottom Bracket - O.M.A.S. sealed-bearing bottom bracket O.M.A.S. alloy crank bolts
Chainwheel - Dura-Ace 44T
Hard lacquer coated copper plating on all aluminum alloy parts.

This bike is exact with all original NOS parts. The seat and hubs are used but really clean!

DIALIN’ IN
Jeff Tollefson - The Torker Kid

Attached File(s)

•  1981_Jason_Jensen_Torker_Jeff_Tollefson.jpg (72.47K)
  Number of downloads: 35
•  1981_Jason_Jensen_closeups_JTFreestyle.jpg (43.1K)
  Number of downloads: 32
•  1981_BMXA_Jensen_cover2_.jpg (45.01K)
  Number of downloads: 2

[BMXROB]

1981 GT Pro

1981 GT Pro Frame
GT Undrilled Nora Cup Fork
GT Pro Bars 1st gen (bars rechromed)
Tuff Neck Pro Model Stem (polished)
Tange MX125 Headset
DC MX1000 Brake & DC Tech 4 lever
Skyway Pro Pads & Cooling Fins
Ukai 7c Shinesides w/Suzue Hubs
Cycle Pro Snakebelly Tires
Sugino OPC w/Yakamoto Sealed BB/GT 44t Sprocket
KKT Lighning Pedals
Kashimax MX Seat
GT Seatpost
MX Seatclamp
Repop Decals
 IMG_5914.JPG (259.54K)
Number of downloads: 27

 IMG_5916.JPG (277.13K)
Number of downloads: 17

 IMG_5917.JPG (256.09K)
Number of downloads: 17

[reilley1]

1985 SE Quadangle

 QUAD_1.jpg (268.8K)
Number of downloads: 18
Quadangle Frame (refinished)
Landing Gear Forks
Bullseye hubs
DT SS Spokes
Araya 7X Rims
Mits Comp III tires

 QUAD_3.jpg (461.35K)
Number of downloads: 12



Tange Headset with Tange Headlock
Pro-Neck
Full Size V-Bars
Oury Grips (Thanks Moto BMX)
GT Post
Shotgun Saddle
X-Caliber seat clamp


 QUAD_2.jpg (329.21K)
Number of downloads: 10



Redline Flight cranks
Phil Wood Spider (thanks Frazer)
Takagi chainwheel
MX-1000 brakes w/ Matthauser Shoes
Suntour XC-II pedals
Sedis Chain

[Tony S.]

SE Racing Looptail PK Ripper
This is my Grail PK i put together earlier this year. Hope you like it!

Frame: Looptail PK Ripper with new powder and Repop decals
Fork: Unstamped Landing Gear with new powder and Repop decals
Bars: NOS SE unknurled Pro bars
Grips: NOS A'ME bubble font
Stem: NOS gold Tuf-Neck
Headset: NOS Tioga Beartrap II with NOS Dirt Skirt and NOS Suntour head lock nut
Seat: NOS Elina
Seat post: Stripped and polished Race Inc. aluminum
Seat Post clamp: NOS Dia Comp MX hinged
Brakes: NOS Dia Comp MX 1000 W/Tech 3 lever and Skyway pads
Rims: NOS Araya 7X
Hubs: NOS Shimano DX cassette
Spokes: Painted SS with Gold anno nipples
Tires: NOS Mitsu Comp III's
Cranks: NOS Takagi 180mm
Sprocket: NOS Sugino 44t
Chain: KMC
Pedals: NOS KKT Lightning
Pads: NOS vinyl SE pad set
 BOTY07014.jpg (175.28K)
Number of downloads: 26
 BOTY07016.jpg (178.31K)
Number of downloads: 9
 BOTY07018.jpg (163.62K)
Number of downloads: 14
 BOTY07019.jpg (188.1K)
Number of downloads: 11
 BOTY07021.jpg (198.14K)
Number of downloads: 10
 BOTY07025.jpg (173.35K)
Number of downloads: 13

This post has been edited by Tony S.: 17 December 2007 - 01:17 PM

[Brian Hays]

NOMURA Chromoly 20"

Chromoly Nomura frame - original chrome, repro decals
CW forks - original chrome, NOS CW decals
Hatta headset - original finish
Powerlite Powerbend Pro bars - original finish
NOS Ame Duals
Pro Neck - original finish
Dia Comp MX1000 brake and Tech 2 lever - original finish
Dia Comp cable - nos
Dia Comp seat clamp - original finish
Uni Hammerhead seat and post - original finish and decal
NOS California Lite pads and lever cover
Sugino GT 175mm cranks - original finish
Tioga bottom bracket - new
KMC chain - new
Sugino spider and 44t sprocket - original finish
NOS Skyway graphite pedals
NOS Tioga Comp 3 Rainbow label tires, 20x2.125 & 1.75
Araya 7X hoops - nos
Campagnolia Record Hubs - original finish
Stainless 14ga spokes and nipples - new
Cycle Pro tubes and rimstrips - new
SST Dirt Skirt - nos
Sugino spyder bolts - nos

Attached File(s)

•  IMG_1452.JPG (320.04K)
  Number of downloads: 13
•  IMG_1453.JPG (366.27K)
  Number of downloads: 13
•  IMG_1454.JPG (354.19K)
  Number of downloads: 10
•  IMG_1455.JPG (351.95K)
  Number of downloads: 13
•  IMG_1456.JPG (327.7K)
  Number of downloads: 9
•  IMG_1457.JPG (301.16K)
  Number of downloads: 10
•  IMG_1458.JPG (331.31K)
  Number of downloads: 8
•  IMG_1459.JPG (338.45K)
  Number of downloads: 6
•  IMG_1460.JPG (396.26K)
  Number of downloads: 9
•  IMG_1462.JPG (333.8K)
  Number of downloads: 8
•  IMG_1463.JPG (328.37K)
  Number of downloads: 9

[BAD-SHOT]

1980 Mongoose Moosegoose

Frame: Moosegoose competition racing frame
Fork: Mongoose Moosegoose with tange320 headset
Note: (New finish with original decals on frame set)
Stem: Tuff neck 2000 (raw silver finish)
Bars: CW cruiser 6x28.5 with Oakley 3 grips
Pads: Mongoose vinyl snap
Rims: Araya Areo
Hubs: ACS sealed bearing
Tires: Kenda comp III style
Seat clamp: Dia compe 2 piece
Seat post: Odyssey layback
Seat: Elina lightning
Cranks: SR tubular 175mm with sealed bearings
Chain: Isumi silver with redline tensioners
Sprocket: Tuff Neck 42t with power disc
Pedals: Suntour XCII
Brakes: Dia compe Bulldog front
Dia compe MX900 rear
Tech II levers
Skyway Pro brake pads





Thanks goes out to Kerry for this one, It was from Moosegoose Nick's collection

Attached File(s)

•  IM000584_3.JPG (106.59K)
  Number of downloads: 13
•  IM000585.JPG (100.05K)
  Number of downloads: 8
•  IM000587.JPG (145.5K)
  Number of downloads: 10
•  IM000588.JPG (141.88K)
  Number of downloads: 8
•  IM000584a.JPG (90.5K)
  Number of downloads: 9
•  IM000585a_1.JPG (103.21K)
  Number of downloads: 12
•  IM000586a_2.JPG (138.68K)
  Number of downloads: 9

[AGUILAR3]

NOS 1983 Nora Cup GT mini


.NOS 83 mini GT Nora Cup frame/forks

.NOS GT mini bars

.NOS GT stem pad

.NOS GT frame pad (re-pop)

.NOS red/yellow AM'E fini "build a grip" grips

.NOS gold 1-3/8 7b Ukai hoops

.NOS red nipples

.NOS comp 3 1-3/8s grey label

.NOS GT hubs

.NOS yellow mini UNI seat

.NOS red hinged DC MX seat clamp

.NOS red KKT lightning magnesium /ti pedals

.NOS red Cycle Pro Hatta headset

.NOS GT chain

.NOS red Torker mini stem

.NOS dated 83 DC 500 rear brake caliper

.NOS red Skyway fin/yellow brake pads

.NOS red DC tech 3 lever

.NOS yellow clear brake cable

.NOS DC brake cable clips

.NOS dated 83 Heatcliff stem caps

.NOS Aeromax axle nut covers

.NOS Suntour mini cranks 152mm fully polished

.NOS red Sugino 40t chainring

.NOS Shimano freewheel


 NoraCup_GTmini_002__Medium_.jpg (108.58K)
Number of downloads: 17
 NoraCup_GTmini_035__Medium_.jpg (87.95K)
Number of downloads: 16
 NoraCup_GTmini_015__Medium_.jpg (116.05K)
Number of downloads: 17
 NoraCup_GTmini_022__Medium_.jpg (109.19K)
Number of downloads: 12
 NoraCup_GTmini_004__Medium_.jpg (98.01K)
Number of downloads: 10
 NoraCup_GTmini_006__Medium_.jpg (76.03K)
Number of downloads: 8
 NoraCup_GTmini_008__Medium_.jpg (88.88K)
Number of downloads: 8
 NoraCup_GTmini_010__Medium_.jpg (100.71K)
Number of downloads: 14
 NoraCup_GTmini_011__Medium_.jpg (78.89K)
Number of downloads: 8
 NoraCup_GTmini_012__Medium_.jpg (78.73K)
Number of downloads: 8
 NoraCup_GTmini_013__Medium_.jpg (102.1K)
Number of downloads: 11
 NoraCup_GTmini_014__Medium_.jpg (87.36K)
Number of downloads: 5
 NoraCup_GTmini_023__Medium_.jpg (111.82K)
Number of downloads: 7
 NoraCup_GTmini_025__Medium_.jpg (61.67K)
Number of downloads: 13
 NoraCup_GTmini_027__Medium_.jpg (108.33K)
Number of downloads: 12

[sdillman17]

1981 GT Santa Ana Pro
 Laurenbmx.jpg (532.21K)
Number of downloads: 131
 1.jpg (221.33K)
Number of downloads: 28



Please Check out Larger Pics in Trackside Forum....Thanks
 f.jpg (118.92K)
Number of downloads: 13
 3.jpg (62.63K)
Number of downloads: 6  4.jpg (80.2K)
Number of downloads: 15

 5.jpg (71.41K)
Number of downloads: 6  6.jpg (76.98K)
Number of downloads: 7

 7.jpg (67.24K)
Number of downloads: 6  8.jpg (79.67K)
Number of downloads: 6

 9.jpg (80.32K)
Number of downloads: 5  10.jpg (66.77K)
Number of downloads: 6

 11.jpg (71.04K)
Number of downloads: 7

Bars- GT Pro (rechromed)
Forks- GT undrilled
Grips- Nos Ame Rounds (bubble font)
Neck- Pro Neck (polished)
Brake- Nos Dia-Compe MX 900
Lever- Nos Shimano DX
Cable- Nos Dia-comp
Cable clamps- Nos Dia-Compe
Seat- Nos Kashimax
Seat post - Nos GT (early round stamp)
Seat post clamp- Nos ACS
Rims- Nos Araya 7X
Hubs- Original Bullseye (converted to allen bolts)
Tires- Cheng Shin
Cranks- Takagi MX 175
Chainwheel- Nos Takagi
Bottom Bracket- Nos Early Takagi
Pedals- Nos Shimano DX
Chain- Izumi

Thanks for looking, I have owned this bike since I was eleven and decided to restore it two years ago and just finished it about a week ago. I am Very proud of it and I think it turned out great, I hope you do to. Vote for sdillman17, Thanks to all, and special thanks to the GF.

Attached File(s)

•  2.jpg (63.08K)
  Number of downloads: 1

[TrulyOdd]

1982 STAR BMX
(Star Products - pre GHP)
(*only one known to exist!)

this is my original race bike.....i aquired it from my friend, pro factory rider KEVIN McCARTHY. i raced it from 83-85 and again in the mid 90's.....i never wanted a different bike! i had to have this bike from the moment i saw it. i used to bug kevin, telling him i wanted his bike. when he switched sponsors in 83 he finally sold me the frame & forks. i hope you enjoy it as much as i do.

**(i included a picture out of SUPER BMX of him racing on it at the grands)
**(i put 187 on the plate because it was kevin's number........and in the words of snoop dogg: ___ on a undercover cop)

 star_side.jpg (227.44K)
Number of downloads: 47
 star_front_side.jpg (220.64K)
Number of downloads: 28
 star_back_side.jpg (215.67K)
Number of downloads: 17
 star_bars_grips_2.jpg (190.21K)
Number of downloads: 22
 star_back_close.jpg (309.3K)
Number of downloads: 25
 star_headtube_decal.jpg (517.79K)
Number of downloads: 12
 star_kevin_mccarthy_photo.jpg (486.43K)
Number of downloads: 42



frame: star products
forks: star products
neck: pro neck stamped
bars: patterson pro
seat: kashimax mx
post: CW (straight)
brake caliper: dia-compe MX 1000
brake handle: shimano dx
seatclamp: SR
cranks: profile 2nd gen
sprocket: profile 1st gen
chainring: tuf neck (chrome)
freewheel: suntour 16t (chrome)
chain: izumi (chrome)
pedals: suntour xc-II
rims: araya 7x (chrome)
hubs: bullseye (chrome/red) allen bolt
tires: IRC Z-III (skinny/skinny)
grips: oakley b-1b (dye'd sleeves)
headset lock: tange
headset: tioga beartrap 2
bottom bracket: profile
numberplate: haro flo panel & stadium numbers

[ALAKRAN]

1984 SKYWAY TA XL

POWDERED FRAME
NOS FORK
NOS TANGE LP 125 HEADSET
RECHROMED GT PRO BARS
POWDERED REDLINE BRUTE STEM
NOS OURY GRIPS
NOS SHIMANO DX BRAKE LEVER
NOS WEINMANN BRAKE CABLE
NOS DIACOMPE 900 BRAKE
NOS SKYWAY DECALS NOT REPRO
NOS SKYWAY PADS
NOS KASHIMAX PADDED SEAT
SURVIVOR GT SANTA ANA STAMPED SEATPOST
NOS DIA COMPE HINGED SEATCLAMP
NOS POWDERED SKYWAY PEDALS
POWDERED REDLINE 401 CRANKS
IZUMI CHAIN
NOS BULLSEYE HUBS
NOS SCHWINN APPROVED SPOKES
SURVIVOR UKAI HOOPS
NOS MITSUBOSHI COMP3 TIRES
NOS ZERONINE PLATE


HEY THIS BIKE ISNT NOS ANYMORE IVE BEEN RIDING IT THROUGH DIRT TRAILS WITH MY SON AND HIS PROFILE SHELBY JAMES.

 SV400024_edited.JPG (101.47K)
Number of downloads: 10
 IMG_1581_edited.JPG (110.92K)
Number of downloads: 12
 IMG_1577_edited.JPG (30.82K)
Number of downloads: 9
 IMG_1573_edited.JPG (111.36K)
Number of downloads: 11
 IMG_0718_edited.JPG (134.49K)
Number of downloads: 6
 IMGA0002_edited.JPG (89.41K)
Number of downloads: 7

[QuicksilverBMX]

1981 KUWAHARA KZ-1

KUWAHARA KZ-1 FRAME POWDERCOATED
TANGE TRX FORKS POWDERCOATED
ARAYA 7X POLISHED
SUNSHINE SEALED BEARING HUBS
SHIMANO 600 CRANKS
BEARTRAP TYPE PEDALS NOS
SHIMANO CHAINRING
TIOGA COMP III TYRES NOS
KUWAHARA GRIPS NOS
ELINA SEAT NOS
DIA COMPE TECH 2 LEVER NOS
NITTO BARS
ALLOY STEM
TANGE SEAT POLE NOS
TANGE SEATCLAMP
DIA COMPE MX1000 CALIPER
KUWAHARA DECALS SOURCED FROM EBAY
 IMG_1492.jpg (118.33K)
Number of downloads: 14
 IMG_1493.jpg (89.89K)
Number of downloads: 9
 IMG_1494.jpg (74.19K)
Number of downloads: 11
 IMG_1496.jpg (68.76K)
Number of downloads: 9